UK stockist of BC Racing Suspension

Peugeot 306 - BC Racing V1 Series Coilover (Type VN) - 1993>2001

From: Excl. Tax: £524.25 Incl. Tax: £629.10

To: Excl. Tax: £585.48 Incl. Tax £702.57

Incl. Tax: £0.00 Excl. Tax: £0.00

Add Items to Cart
BC V1 Series Coilovers (type VN) - VN-K-06   +£524.25 (+£629.10 Incl. Tax)

* Required Fields

Incl. Tax: £0.00 Excl. Tax: £0.00

Add Items to Cart

Be the first to review this product

  • 30 clicks of damping adjustment
  • Height adjustment via bottom mount to retain full damper travel, Adjustable spring platform for corner weighting
  • Mono-tube damper technology
  • Choice of spring rate
  • fully rebuildable with all parts available for purchase
  • Nitrogen pressurised dampers
  • 1 year limited warranty against manufacturer defects

Please note we are unable to ship the BC Racing range to the following countries: France, The Netherlands, Finland, USA & Canada, China, Singapore, Taiwan, Japan, Malaysia, South Africa, Australia. If your country of residence is on this list then you have a local distributor. Please direct all enquiries to them. They will be able to get the complete BC Racing range.

The BC Racing V1 Series Coilovers are BC Racing's entry level coilover kit. These Coilovers are designed for fast road and track use. The BC Racing V1 coilovers are able to have the damping tweaked with 30 clicks of adjustment. The kits are a step above most manufacturers with the method of height adjustment as it is altered by moving the damper up or down in the hub rather than by using the spring platform. This means the full damper stroke is retained at each ride height improving performance and ride quality. These BC Racing coilovers use large oil capacity monotube bodies to improve damper performance further.

V1 Series
Front Coilover
Rear Coilover
Type VS
Inc Rubber Top Mount
Inc Rubber Top Mount
Type VT
Inc Rubber Top Mount
Without Top Mount
Type VL
Without Top Mount
Inc Rubber Top Mount
Type VN
Without Top Mount
Without Top Mount
Type VH
Inc Pillowball Top Mount
Inc Pillowball Top Mount
Type VA
Inc Pillowball Top Mount
Inc Rubber Top Mount / Non Top Mount
Type VM
Inc Rubber Top Mount
Inc Rubber Top Mount / Non Top Mount

BC Racing V1 Series Features

44mm diameter pistons / 50mm diameter damper body

BC Racing's V1 Series is their entry level coilover kit designed for road / trackday use. The BC Racing V1 Series coilovers use a large 44mm diameter piston in a 50mm diameter damper body to increase oil capacity over standard dampers.

Combined Rebound and Compression Adjustment

These BC Racing V1 Series coilovers feature 30 clicks of damping adjustment combining both rebound and compression in one adjuster for simplicity and ease of use.

Standard Features of all BC Racing Coilovers

Ride Height Adjustment

BC Racing Coilovers alter ride height using an adjustable bottom mount. As ride height is set by this bottom mount rather than the spring platform your BC Racing Coilover retains full damper travel no matter what your ride height. This also allows the BC Racing Coilover spring pre-load to be set independently.

Nitrogen pressurised Monotube Coilovers

The BC Racing coilover kits use Nitrogen pressurised Monotube dampers with a large diameter pistons and bodies. Mono-tube pistons are much larger than twin-tube coilover dampers. This allows it to be more sensitive to small suspension movements . The larger outer shafts are stronger so they cope with higher side loads. Nitrogen pressurised Monotube coilover dampers give a more consistent damping performance and do not suffer from aeration or performance fade in comparison to a twin tube BC Racing Suspensiondamper design.

Corner weight adjustment

The lower spring platforms of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.

The car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.

Corrosion protection

The BC Racing Coilover damper units are black chromed steel to give superb durability against the weather and road salt in winter. The aluminium components are anodised and the steel lower mounts go through an electrocoating process followed by powder coating.

Top mounts included on most kits

Many of the BC Racing coilover kits come with complete with replacement top mounts. These BC Racing top mounts are either rose jointed (pillowball) top mounts or rubber top mounts. The anodised alloy top mounts eliminate any flex or play associated with the standard rubber top mounts, improving response and handling. In addition some of the BC Racing coilover kits also allow for camber / castor adjustment through the solid top mounts to give additional tuning flexibility.

Optional BC Racing Damping Extenders

The BC Racing coilover kits are available to be purchased with rear damping extender cables. If chosen these allow you to adjust the 30 way damping from a more convenient position on the car. Three lengths are available and these can be cut down to size.

Custom spring rates at no extra cost

Kam Racing are able to supply the BC Racing coilover kits with spring rates of your choice at no extra cost. Simply contact our sales team and we will arrange this for you..

Additional Information

Car Marque N/A
Manufacturer BC Racing
Model Part Number VN-K-06
Car Model 306
Application Fast Road, Track
Year of Manufacture 1993>2001
Damper Design Mono-tube
Material of coilover strut black chromed steel
Suspension Type (Front) MacPherson Strut - Adjustable Coilover
Suspension Type (Rear) Standard Rear Torsion Bar
Spring Rate (Road) Front: 5kg/mm Rear: N/A
TUV Certification Factory has TUV approval for manufacturing process: Individual Items not TUV certified. Technical Drawings and Letter of conformity available on request

Customer Reviews

No reviews have been found

Write Your Own Review

You're reviewing: Peugeot 306 - BC Racing V1 Series Coilover (Type VN) - 1993>2001

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

View more products from the range

Please wait...